@sagarg119_21761 I made this. Took 5+ hours, but I didn't care. I'd rather do this than do drywall panel removal and patching. A question - you've included the recessed line at the bottom for the rubber piece that came with the original mount. Did you transfer the rubber piece from the original mount to yours? I found that the keypad may come out too easy if nothing is there. (edited)
@phybersplice_1047311 Hey! Sorry, I never realized that you asked a question. Yes, I ended up pulling the rubber piece from the original mount. The only problem was that then I needed to apply another adhesive because the original wasn't sticky enough anymore. I actually have another one where I didn't pull the rubber piece off and it wasn't that bad but the rubber piece definitely helps.
@sagarg119_21761 I figured it might help as the keypad just kind of flops around a bit. I ordered a 2nd keypad and will probably use the rubber strip unless I can find an alternative to use.
Otherwise, thanks for creating this. It totally helped.
@sagarg119_21761 I made this. Took 5+ hours, but I didn't care. I'd rather do this than do drywall panel removal and patching. A question - you've included the recessed line at the bottom for the rubber piece that came with the original mount. Did you transfer the rubber piece from the original mount to yours? I found that the keypad may come out too easy if nothing is there. (edited)
@phybersplice_1047311 Hey! Sorry, I never realized that you asked a question. Yes, I ended up pulling the rubber piece from the original mount. The only problem was that then I needed to apply another adhesive because the original wasn't sticky enough anymore. I actually have another one where I didn't pull the rubber piece off and it wasn't that bad but the rubber piece definitely helps.
@sagarg119_21761 I figured it might help as the keypad just kind of flops around a bit. I ordered a 2nd keypad and will probably use the rubber strip unless I can find an alternative to use.
Otherwise, thanks for creating this. It totally helped.