Round Table Lamp

The lamp is 80 mm wide and 150 mm tall.
It's printed in three pieces, so no support is needed.
The translucent top part was printed with 10% infill, the other two 20%.
The filler powder was used to give the base some weight.
A glue gun was used to secure the cable in the base, and to attach the top and base together.

The fittings were all sourced from E-Bay, here are the search terms I used:
The Electronics : 38 leds energy-saving lamps suite without led diy kits
The LED's : 100Pcs X 5mm White Ultra-Bright LED Wide Angle Light Lamp Bulb Emitting Diodes
The mains cable with switch: in line mains switch with cable

Print instructions

Category: Decor Summary

The lamp is 80 mm wide and 150 mm tall.
It's printed in three pieces, so no support is needed.
The translucent top part was printed with 10% infill, the other two 20%.
The filler powder was used to give the base some weight.
A glue gun was used to secure the cable in the base, and to attach the top and base together.

The fittings were all sourced from E-Bay, here are the search terms I used:
The Electronics : 38 leds energy-saving lamps suite without led diy kits
The LED's : 100Pcs X 5mm White Ultra-Bright LED Wide Angle Light Lamp Bulb Emitting Diodes
The mains cable with switch: in line mains switch with cable

Print Settings

Printer Brand: Prusa

Printer: Prusa Mk2

Rafts: No

Supports: No

Resolution: 0.2

Infill: 20% and 10%