C&D – Cattle transport body for PB-type (1-148)

Don’t have a resin printer? You may buy the model at N'Tastic Scale Models:
https://www.ntastic-scale-models.co.uk/shop/under-licence-range-slanjonok-range/WLZIUUC3AWPRTNDKJOPXNJVZ 
----

After upload of the cows a while ago 
https://www.printables.com/de/model/302165-cows-for-slopes-ramps-and-flat-surfaces-1-148
I finally finished the cattle body for my Thornycroft-PB-type. Chassis/cab/wheels and driver figures of any version can be downloaded here:

https://www.printables.com/de/model/302154-oit-thornycroft-pb-type-1-148
https://www.printables.com/de/model/302164-cd-more-thornycroft-pb-versions-1-148

The body can be printed with open or closed ramp. 

I also introduce here the fender guards, able to use with any other chassis/body of the PB-type.

For loading/unloading scenes two “cowboys” are available to. Bottom of ramp and body is normally covered by straw. In my diorama I used some from Woodland Scenics, available in different lengths (I used FS620, 4mm):
https://woodlandscenics.woodlandscenics.com/show/item/SGS

For H0/OO-scale the Faller straw 170776 might be the better choice, as in my eyes the Woodland one is a little to yellow, the Faller ones looks more naturally, but is only available in 6mm, what is too long for n-scale (in my view):
https://www.faller.de/en/model-layout-construction/fields-meadow/1119/premium-ground-cover-fibres-straw-6-mm-30-g?number=170776

I had my fun creating this model, hope it will be helpful to someone for his model railway or just for display. I would be happy to see your version.

All models sized for British n-scale (1:148). Conversion values:
Continental N-scale, 1:160 -> 92.5%
TT-gauge, 1:120 -> 123%
HO/H0-gauge, 1:87 -> 170%
OO/00-gauge, 1:76 -> 195%
S-gauge, 1:64 -> 231%
O-gauge, 1:48 -> 308%