Rockward (Squidward + The Rock)

Just a fun mashup I slung together. Supports are needed for this model. Remixed from these two files:

• https://www.prusaprinters.org/prints/32751-dr-smolder-bravestone-dwayne-johnson
• https://sketchfab.com/3d-models/squidward-tentacles-8d8cae9fd10f40878df75bcea30ba2eb

This design is uploaded with a non-commercial license.  If you would like to consider gaining access to ALL of the models and the rights to print and sell, you can check out my Patreon at https://www.patreon.com/thinair3D

Printing Info: 

FDM or Resin: FDM or resin
Scaling: Current Size: 44 x 46 x 128. Scale up or down as you please!
Supports: Supports needed everywhere, including the head!
Nozzle Size I Used: 0.4
Infill/Perimeters: 15% with 2 perimeters
Layer Height: I used 0.20, but any layer height should be fine.