G9 Extruder v3(Remix) Ender 3

https://youtu.be/sJpBpWr0P4A

Original design：https://www.thingiverse.com/thing:5172583 https://github.com/CroXY3D/Sailfin-Extruder

I don't have cad models
If you have any questions, please feedback me

what you need

BMG Extruder Kit
orbiter extruder motor 17mm or 20mm
E3D V6 Extruder Radiator (it needs improvement, or rather sawing off 3 cooling fins and top)
heater block Volcano or e3d
2x 5015 radial fan
1x 4010 fan
4x M3x20 
6x M3x8 round head screw
9x M3x10 round head screw
2x M3x12 
9x hot melt inset nuts M3
6x nut M3

Models are created for the line 0.4mm, the layer height is not higher than 0.2mm. filling at least 50%

only one part has support (g9__feeder_1) remove them carefully after printing.

the total weight of my assembly is about 250 grams