Ender 2 Pro Fan Duct

Ender 2 Pro fan duct in two parts. 
The fan holder for a 5010 fan (e.g. Noiseblocker XS1) and a support bracket for the upper right corner. 
The bracket on the upper right side first is mounted to the carriage and then the fan duct is bolted to the bracket and the carriage. In the final step the fan is mounted to the duct.

! This is still a work in progress !

(The cavities for the nuts are a bit too small, but it's possible to press in the nut with a soldering iron.
But the overall design works well, now tested for many hours of printing.)