T-Track rail easy to print - no support

This is a t-track with official measurement, except the profil is 45° instead of 90° for an easay print without support, otherwise it is a mess to print.

Size is 280mm and 220mm , but ask for other size if you want to adapt to your 3D printer for instance 300mm or anything else.

Conform to dimension of what you can buy on the net, and especially to https://fr.aliexpress.com/item/1005002675903572.html?spm=a2g0o.cart.0.0.17cc378dUKSlD0&mp=1&gatewayAdapt=glo2fra

included:

T-Track 280mm :

T-track rail 280 mm, holes are 5mm and 6mm. [0.76€ 43gr, 13,41m 20% 4h50mn ] 20% 4 wall lines
T-track miter 280mm : print with no border, but support. [ 0,53€, 30g 9,33m 3h21mn] 20% 4 wall lines

T-track 220mm

T-track rail 220 mm, holes are 5mm and 6mm
T-track miter 220mm

T-Track 300mm 

T-track rail 300 mm [0,82€, 46g, 14,42m, 5h17mn]
T-track miter 300mm [0,58€, 32g, 10,19m, 3h44mn]

16/01/2022:
Upon request add more screw holes on each T Track in order to remove the flexing due to plastic (one hole every length T-track/4) : deliver new STL:
T-trail_Rail_280mm_v2.stl
T-trail_Rail_220mm_v2.stl
T-trail_Rail_300mm_v2.stl

Common

• T-track TPU spacer to reduce clearance (not needed) [ 0,01€, 1g, 0,16m, 4mn] 20% 4 wall ines
• Small T-track nuts (30mm) with hole screw of 8mm [ 0,07€ 4g, 1,16m, 0h31mn] 20% 4 wall lines
• T-track Cross connector 4 axis
• T-Track Straight Connector 2 axis 

Print Settings

Printer:

Artillery Sidewinder X1

Rafts:

Doesn't Matter

Supports:

Yes

Resolution:

0.2

Infill:

20%

Filament brand:

Wanhao

Filament color:

light green

Filament material:

PLA + TPU

Notes:

Nozzle 0.4
Number of lines 4
Infill : 20%
Support : only for Miter + Small nuts