Cute winter cottage with a slot for an LED tea light.
44
162
4
861
updated January 1, 2023

Description

PDF

Cute winter cottage illuminated with an LED tealight.

The bottom part WinterCottageWall_<size>.stl (e.g. WinterCottageWall_L.stl) can be printed without support structure, the top part WinterCottageRoof_<size>.stl (e.g. WinterCottageRoof_L.stl) should be printed with support structure.
A layer height of 0.2 mm is sufficient.
Top and bottom should be glued together after printing. There is a hole in the lower part into which an LED tea light is to be clamped.

Updates:

  • [2022-12-09]
    • Alternative roof WinterCottageRoof_ShrinkingStars.stl
  • [2022-12-10]
    • Added model WinterCottageWall_NoSlipping.stl with stopper for the LED tea light so that the tea light does not slip in, especially when changing the battery.
    • Cleaned up the SCAD file.
    • Added smaller model (WinterCottageWall_Small_NoSlipping.stl and WinterCottageRoof_Small_ShrinkingStars.stl)
    • Added adapter for smaller tea lights (WinterCottage_TeaLightAdapter.stl).
  • [2022-12-14]
    • Renamed files
    • Added medium size model
    • Removed models without “no slip in”
    • Removed models with equal sized stars

The model files also contain the OpenSCAD file, through which the model can be customized. It should be noted that rendering the upper part can take a long time.

Tags



Model origin

The author marked this model as their own original creation.

License