Bambu Lab P1P closed side panels

Unfortunately my P1P is not coming until January, so I can't fit and check the parts yet. It would be good if someone could print and install them so we can check the fit.

Important Update: 23.01.2023. 

Printing these Files is complicated. ABS/ASA/PETG all failed because of Warping, the parts are to thin and large. Even with my X1C i had no success. PLA is not a reliable Material because of the temps inside the enclosure. I don't think this project will work out. You can use the Remix made by Hobo4ssassin for the Side panles (Hinges for the door missing).

https://www.printables.com/model/365821-p1p-enclosed-sides-armor-modplate

But I cannot guarantee success if you start this project. Consider it as BETA.

• Print the parts individually in the best case
• Use supports
• 15-20% infill
• ABS/ASA

I will also print and update the parts if there are problems.