Z axis stabilizer - Ender 3

This is adjustable stabilizer for the top end of the Z axis lead screw on Ender 3/pro/…

!Before you install it make sure you have properly aligned your Z axis stepper or you will probably just make more trouble installing this stabiliser!

How to: Better Z motor mount - adjustable and reinforced od autora radkoko | Stáhněte si zdarma STL model | Printables.com

You will also need:

• 1x 608 bearing
• 4x M3x10 round head screw
• 2x M4x10 flat head with T nut

This stabiliser will make sure your lead screw end won't move any more which is important if you want to install single motor dual Z on your Ender. When you install pulley above the bearing it should also reduce banding from springy Z stepper shaft - not tested yet.

Also know that this stabiliser will reduce your Z movement to around 245 mm.

If you really like the design and/or just want to appreciate my work and time spend, you can buy me a coffee.