Reinforced Blue Robotics Thruster Mount for 4" curved pipe hulls

This Edition of my reinforced ROV mount for the Blue Robotics T100 and T200 thruster was created for use with 4" diameter pipe hulls, as seen on the SV Seeker ROV. You'll want to print it flat side down.

As always, Design files are available as well, just let me know what format you need

Print instructions

Unassociated tags: SV Seeker

Category: Robotics Summary

This Edition of my reinforced ROV mount for the Blue Robotics T100 and T200 thruster was created for use with 4" diameter pipe hulls, as seen on the SV Seeker ROV. You'll want to print it flat side down.

As always, Design files are available as well, just let me know what format you need

Print Settings

Printer Brand: LulzBot

Printer: TAZ 5

Rafts: No

Supports: No

Resolution: 0.5mm nozzle was used, but anything should work.

Infill: As close to 100% as you can get it.

Notes:

Printed in ABS.