Jinx's Fishbone Keychain - Arcane/League of Legends

I saw an image of a similar keychain online and decided to turn it into a 3D model (the website I found it: https://www.difuzed.com/league-of-legends-jinx-rubber-keychain.html ). I turned the image to greyscale, smoothed some edges and converted it to an SVG file so that it can be processed in Tinkercad. The first 3D model I got is named ‘main 2d image’ and you can use that anywhere you want. 

Printing Details

There are 3 printing options. 

One of them is to just print the model in one colour and then paint it. This might work fine, but it's not a good idea if you are planning to use the print as a keychain.

What you can also do is print the ‘all in one’ model and perform two filament changes, one for the letters and one for the missle. The result should look like the screenshot I took from Tinkercad. 

Lastly, you can print the base on top of the letters and the fishbones. Slice each model individually at 0.2 layer height. Print the letters, remove only the outer square perimeter without letting the build plate cool down, and then print the fishbones and the base, repeating the same process with a different colour filament. It is very important that your first layer is perfect in order for this method to work. If you have trouble with the first layer, try tweaking the elephant's foot setting in your slicer. Also, for better results, use the smooth side of a glass bed for a shinny finish.  

Notes: I tried to sand the face of the keychain and then spray it with some clear acrylic paint. As you can see, that did not work very well for me because first I did not sand it well enough and second the spray was running out and gave it an uneven coat.