TicTac Shooter

For Sale here: https://atlaslabs3d.com/

"Elite" version of this model with many fixes, upgrades and features is available here:
https://cults3d.com/en/3d-model/game/ttg2-a-better-box-connection

Loading mechanism was redesigned for more reliable loading and firing.
a "Set" window on the left side was added to quickly see if the tictac is correctly seated and ready to fire.
break-away bridge supports were added for cleaner printing, (can be easily snapped away before use)
Two versions - one for 4mm "Pen Spring", another for 6mm BIG Spring (recommended).
For 6mm spring (I used 6mm OD, 0.6 wire size, 50MM free length) - Amazon UK link: https://www.amazon.co.uk/dp/B076LTYY5K/ref=cm_sw_r_u_apa_glt_fabc_FZZBQ8SBB9D0Q93MNVQS?_encoding=UTF8&psc=1
Overall model adjustments for cleaner 3d printing.
Please make sure the screw holding the trigger is NOT LOOSE, you must tighten it, otherwise it may not lock in place correctly when the gun is set for firing <<<

Please note that 3D printing orientation was taken seriously when designing the parts. all parts can be printed without supports.

The SCREW SIZE I have been using is an "M3x20", the "screw length is 20mm. Measuring the full length of the screw from top to bottom (with calipers) the screws are 21.5mm in total length. I then use a small M3 nut on the other side.

Hopefully, it works well for everyone, Enjoy!