Lack enclosure / external controller/display mount w/floor cable port

MK3S/MK3S+ mounting bracket for controller/display with a big access hole for ribbons/and power supply wires
4h 31m
3× print file
0.20 mm
0.40 mm
46.00 g
3
25
0
236
updated December 5, 2022

Description

PDF

This was to accomplish two things. 1) the big access hole in the floor helps to run the ribbon/PS wires when removing the printer for cleaning/maintenence 2) I wanted to move the controller out of the enclosure so I could access the SD card while ABS prints cool slowly, side benefit is being able to access the ambient temperature sensor on the EINSY board on the ‘support’ menu without opening the enclosure

The cable port is secured with a zip tie and a zip tie head (just run the full zip tie through the bracket and run just a head down to secure it (see pic)

Tags



Model origin

The author hasn't provided the model origin yet.

License