Electric guitar RedRaven1

Electric guitar with integrated Mooer PE100 multieffect. Ideal for shredding at home. No cables and amps needed. Plug…
61
167
0
2654
updated December 5, 2022

Description

PDF

Electric guitar with integrated Mooer PE100 multieffect.

Ideal for shredding at home. No cables and amps needed. Plug headphones in and jam.

All parts are screwed together with M3 screws with brass inserts, except core M5 screws. Only core is glued.

Core is printed 3mm all walls (superslicer settings), 75%infill, PLA CF from SUNLU, body 2 walls, top/bottom 4 layers. All parts fit 235x235x250 print volume.

Before gluing core, insert 2 longest you have brass inserts for screwing tremolo claw plate.

Neck I got is some weird one with notch on one side. If you want to install normal neck, like strat, there is stp file.

Mooer is powered with one (if you want you can use two) 21700 battery. With adapter you can use 16500. In two months I haven't recharge battery. If you plan to use original 2x AAA batteries, they will be empty in like 30min.

Mooer has 2 positions, closed for playing and opened so you can see it. For that cable needs some slack place for extra cable is under mooer. Unfortunately, it does not have on/ off switch. When it is plugged it is on.

I've used Gotoh 301 tuners and el cheapo aliexpress humbukers. They will be changed in the future.

https://stenc55.wordpress.com/2022/01/09/3d-printed-guitar/

Category: Music

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License