iPhone 14 Pro Max bumper case

Bumper case to be printed in TPU
35
285
0
1817
updated December 4, 2022

Description

PDF

This is a bumper case for the iPhone 14 Pro Max. It protects the lenses and lets the phone lay flat on a table. It is meant to be printed in TPU. It's quite a difficult print. The included 3mf file has the settings I used in PrusaSlicer. Basically, you need to print it slowly, around 30 mm/s. use supports only for the top part of the case with no interface layers. I also set the XY support separation to 0.35. Finally, I set the seems of the bumps to the internal part of the print. 

Tags



Model origin

The author marked this model as their own original creation.

License