UniTak3D Rail X-axis Conversion Belt Fix with added LED Bar

The plate was drill in my opinion, in the wrong place so the plate it too far away and the belt
2
16
0
266
updated December 4, 2022

Description

PDF

https://www.amazon.com/dp/B09M73XRBH?psc=1&ref=ppx_yo2ov_dt_b_product_details

UniTak3D Rail X-axis Conversion Belt Fix with added LED Bar

I got one of these kits because I installed a BLV rail kit a year ago and the rails were crap. So fighting with them this past year they seem to have less issues when used flat. I tried this kit and found it to be a great Idea. It works great but it does have a belt placement issue. The plate was drill in my opinion, in the wrong place so the plate it too far away and the belt just barely hold in the slots, and it did indeed popped off of mind after just a little use. I made the locking clips to keep the belt in the rail slot and in the carriage plate belt slots. I think they should address this issue. Anyway I made a few options to fit the Aquila, Ender 3 , Pro and V2. Let me know if you need any special fix.

PS, You can also stick a 3 light LED strip on the bottom.

Category: 3D Printer Accessories

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License