Simple base for the Lily58 keyboard.
The STL file provided was created with the following parameters, which can be changed in the source .scad to customize it:
clearance = 0.2;
typing_angle = 7;
base_thickness = 0.9;
feet_height = 1;
feet_diameter = 12;
feet_exposure = 0.4;
leg_outer_wall_width = 0.8;
Source can be found at https://github.com/mcampo/lily58-base
To print both sides mirror the model in the slicer.
Note: The PCB in the imaegs is added for reference but it's not part of the model
The author hasn't provided the model origin yet.