Towel holder for radiator (customizable)

This towel holder can be easily attached to the radiator.
You can make it variable in length. Use the corresponding number of tubes (150mm and 75mm). Look at the dimensions in the pictures. If you need other brackets for your radiator, please write this in a comment and tell me the required dimensions.

If you need other pipe lengths, you can use my customizable model:
https://www.printables.com/de/model/331945-modular-tube-with-end-caps-with-f3d-file

UPDATE 12/12/2022
Better stability of Tubes and End_cap_ET.

Printing

Due to the higher temperatures on the radiator, you should not use PLA but PETG etc.

I printed the brackets and the end caps with 0.2mm layer height.
The angle bracket and the end caps with 30% infill, the bracket with 100% infill. 
The tubes with 0.25mm layer height and 100% infill.
 

Assembling

Put the bracket and the angle bracket together (glue if necessary). Screw the tubes together and guide them through the brackets, screw the end caps on the outside. Then attach the whole thing to the radiator. The pictures show how it is done.
 

I am looking forward to your Makes! :-)

If you like this model, feel free to check out my others here.

And maybe you would like to support me with a small donation. Feel free to use the support button on the top right of this page. I myself donate one or two Euros to each designer for an interesting model that is worth five stars to me.