Ubiquiti Unifi G4 Instant Articulating Camera Mount

This is a mounting system for the Unifi G4 Instant Security camera based on an excellent design for the G3 Instant. This design uses a corner bracket or flat mount with a dovetail socket, a 2 piece hinge that slots into the dovetail, and a hinge piece molded to the backside of the camera itself. 

I have printed it successfully in PLA and PETG with supports and a higher infill (40%).

You will need the following additional hardware for the camera mount and hinges.

• #10 x 2 ½" machine screw with nylock nut (hinge)
• #10 x 1 ¼" machine screw with nylock nut (hinge)
• ¼"-20 x ½" hex socket head cap screw (camera)
• 2 x #6 flathead wood screws (mount attachment)

Full credit goes to the original author for his excellent design.

Unifi G3 Mini Camera Mount
by abakedapplepie March 19, 2021
https://www.thingiverse.com/thing:4799966