Side rails for old Yaesu FT-100 HF Radio (NOT FTM-100 UHF/VHF)

Side rails for old Yaesu FT-100 mobile HF/VHF/UHF Radio. NOT for modern FTM-100 UHF/VHF mobile radio.

Side rails are 8mm thick. They are tall enough to leave an air gap under the radio.

Printed with PETG, 20% infill, on Prusa MK2.

Used 4mm socket head cap screws to attach to radio. Make sure that the screws are not too long, or they can damage the radio!

Since it would not fit on my printer, I cut each side into two interlocking pieces.

Print Settings

Printer Brand:

Prusa

Printer: 

Prusa Mk2

Rafts:

No

Supports: 

No

Resolution:

0.20

Infill: 

25%

Filament: KVP PET Yellow

Notes:

I printed mine using 20% fill. You might want to increase that.
Uploaded one piece STL design, too, in case you can print something that larger

How I Designed This ===================

Used OpenSCAD

Category: Electronics