CR10 Direct Drive Toolhead (BETA) with E3D V6 hotend

BOM:
-E3D V6 Hotend / 1pcs
-Bondtech BMG Extruder / 1pcs
-NEMA17 Pancake stepper motor / 1pcs (The standard motor can't be fitted)
-40x10mm Noctua Fan / 1pcs
-M4x16 Screw / 4pcs
-M4x25 Screw / 2pcs
-M3x25 Screw / 6pcs
-M3 Nut / 3Pcs
-PTFE tube for 1.75mm filament (must adjust the lenght)

Recommended printing settings:
-Material: PETG, ABS
-Layer height: 0.2mm
-Infill: 10-15%

Extra informations:
-The Fan Cover must be installed. It switches the X End Stop.
-The design includes an End Stop Holder for Opctical End Stop for Z axis.
-BLTouch can be installed but not tested yet. Designed positions: X31.75/Y6.5
-Cable management is yet to be tested.