Attitude Indicator for Flight Simulation

This is a slightly modified version of the original Attitude Indicator by ZockZock. 

It provides a new designed bezel (as pdf) and a profiled indicator for two color print (white on black). Design and color scheme resembles the original indicators e.g. used in Diamond Aircraft.

See also my other Flight Instruments:
Altimeter for Flight Simulation
Gyro Compass for Flight Simulation
Airspeed Indicator for Flight Simulation 
Variometer for Flight Simulation
Turn Coordinator for Flight Simulation

and my

Modular Cockpit Panel for Flight Simulation

to integrate everything without the need for woodwork.

Please visit also the FlightSimMaker Discord!

A glass front can be mounted between Bezel and Intermediate Ring, the separate Spacer Frame as used by my other instruments is not needed here.

For assembly you need:

2x stepper motors 28BYJ-48 + ULN2003 Driver (or similar)
4x M4x15 screw with nuts for front bezel
4x M4x10 screw with nuts for stepper motors
1x M3x10 screw with washer to mount Vertical Indicator to Rotor (apply screw from inside)
4x M3x6 screw to mount Rotor to Background
4x M2,5x5 screw to mount Carrier Front to Carrier Back
A4 photo paper for bezel print
1x Arduino Mega 2560 or Pro Micro

Print all parts as aligned in the 3mf files. 

Bearing has to be glued to Background along with Horizontal Indicator and Needle.

Adapter is to be printed twice and required for stepper motor axles.

Print Bezel.pdf on photo paper and cut carefully. Glue to Background, Vertical Indicator and Carrier Front, respectively.

Software for X-Plane 12 is available on GitHub: MartinRusk/Sixpack (github.com)

For MSFS configuration, please refer to the Mobiflight Documentation.

This model is limited in roll motion. If you want a full 360° roll, refer to the alternative design by ZockZock: Full 360° Attitude Indicator for Flight Simulator

New designed decals (Diamond Aircraft style) and a profiled indicator for two color print (white on black)