Storage Rack Kit - Customisable

Scale the rack for your exact needs. Utilize your storage space.
5
20
0
429
updated January 30, 2023

Description

PDF

The model is made up by parts that are made to be glued together. 
You choose parts to build your own storage rack. 

No need for nuts and bolts. 

Scale parts in slicer to match height, width and length to your exact needs.

Parts are stacked and glued together. The shelves can be glued and press fitted in to the walls of the rack.

Tip for customization: 
Take measurements of the space you want to put the storage rack into. 
Then choose the parts you want. Find out how tall the selected walls will be (wheels included if needed) when adding up the Z-height of each wall part used to make up the height of your rack. 

Then find the scale number or percentage you need to apply to all needed parts. This is to ensure all parts will fit when assembling. Make sure the wheels are proportionally scaled. 

Important:
When scaling parts, make sure to apply same scale to all parts you plan to use.

Parts:
Walls 
Shelves (short walls type 1 and tall walls type 2)
Shelve support beams 
Wheel

Spesifics:

Walls:
-Bottom wall for type 2 shelves (tall)
-Middle wall for type 1 shelves (short)
-Middle wall for type 2 shelves
-Middle wall without shelve slot
-Top wall for type 1 shelves
-Top short wall for type 1 shelves
-Top short wall for type 1 shelves with handle.

When slicing, you need to duplicate the needed wall so you have 2 walls for each floor of the rack. No need to mirror any part. Prints faster and cleaner if wall is laid down with shelve insert slot facing down on print plate.

Shelves:
- Each shelve is made up by to parts know as A and B.
- A has a cover to hide the seam when assembling A and B. B is without the cover.
-There is a shelve with a tall wall and a shelve with short walls.
-There is a triangle support beam for to be glued under each shelve. There are two slots per shelve for support beams.

Wheel:
-Simple wheel
-Bracket (no rotation)
-Pin
-Pin connector
 
Use slicer program to see the size of individual parts.


 

Tags



Model origin

The author marked this model as their own original creation.

License