Berserk: Behelit

Berserk: Behelit

• Griffith's Egg of the King.
• From the best-selling manga Berserk, by Kentaro Miura.
• I remixed this model from robopillow on Thingiverse to be easier to 3D print.
• I recreated the top cap piece to be more durable.

Printing:

• All files are oriented in the way they should be printed.
  • The cap part is oriented like that so the loop is as strong as possible.

• Printed with 15-20% gyroid infill at a .2mm layer height.
• Supports are only necessary on the cap part.
  • Recommend printing with a .15mm layer height.

Assembly:

• After removing any supports, make sure the parts fit together.
  • The puck part goes between the top and bottom Behelit parts.

• The cap part might have a tight fit, sanding may be necessary.
• Use superglue to bond the parts in place.
  • Superglue may not be needed for the cap if the fit is snug.

Please let me know if anything does not fit properly, or if you have any suggestions.