Plant pot
Just a normal plant pot.
Height is 122 mm (without stand)
32
159
1
953
updated
February 4, 2023
Description
PDFV1 prints without bridging, but requires dedicated stand. V2 has gaps at the bottom to allow water escape.
Filament: ASA, or PETG, PLA should also work. ABS not recommended.
Printer settings:
Vase mode
0,6 mm nozzle
0,8 mm wall thickness
0,2 mm layer
6 or 16 bottom layers (V1/V2)
Model origin
The author marked this model as their own original creation.
