Bosch Truvo / PMD 7 holder for skadis

I wasn't really happy with the existing holders for the Bosch Truvo digital detector, so I came up with my own. It holds the Truvo fairly snuggly but it still is easily removed or inserted. 

I used the M2.5 variant of the T-Nuts for Ikea Skadis Pegboards, of which you will need 3. Detailed instructions for that really handy and well thought out mounting system can be found at the models' site.

The whole bill of materials comes to:

• 1x  this model
• 3x M2.5 T-Nuts for Ikea Skadis Pegboards
• 3x Cylinder head screw M2.5x10 or M2.5x12
• 3x M2.5 nut

Regarding the shape of the holes: This shape follows the design rules from Hydra Research. It helps with retaining the inner diameter of the holes and to prevent drooping.

Supports aren't needed and I used 0.2mm layer height.