NO-ziptie cable anchor 2x2 cm

Modified ziptie cable anchor so that it uses no ziptie but the cable just clicks in.

Base is 20 x 20 mm with up to three versions of different mount options - using glue or not to glue.

Cable sizes 2/2,5/3/3,5/4/4,5/5/6 mm. If you need some other size let me know and I will add it.

!CAUTION! Be sure to check the fit before printing bigger batch because cable sizes and materials are not always the same and cables with harder insulation material or slightly thicker diameter can apply more strain on the retaining parts so make sure to check first if the cable fits properly, holds well and the part won't break. Basically cables with softer insulation material will work better. If you have too tight or too loose fit, let me know and I will add your desired size.

Guide to chosing proper file:

     noziptie_20x20x4_G.stl

20x20 - size of the base in mm (currently only 20x20)

x4 - diameter of the cable in mm (2/2,5/3/3,5/4/4,5/5/6)

_G - mounting option (G=glue / U=universal / S=screws).

Edit 5.12.2022: Added versions for cables 2.5 and 3.5 mm.

If you really like the design and/or just want to appreciate my work and time spend, you can buy me a coffee.