Mike Rockowski (The Rock + Mike Wazowski) - Support Free

Remixed from:

https://www.prusaprinters.org/prints/32751-dr-smolder-bravestone-dwayne-johnson &
https://www.thingiverse.com/thing:1088238

If you would like to support my work or have access to ALL of my files you can consider joining my Patreon: https://www.patreon.com/thinair3D

FDM or Resin: FDM or resin
Scaling: Current Size is 80 x 83 x 35. Scale up or down as you please!
Supports: None!
Nozzle Size I Used: 0.4
Infill/Perimeters: 15% with 2 perimeters
Layer Height: I used 0.20, but any layer height should be fine.