Zuriga E2 coffee machine / key fob
Description
PDFSince it takes 2+ months for manufacturing the machine, I came up with a design that is printable with FDM printers and can be given away as a present for the time till delivery.
When slicing, ignore the empty layer gap warning of the coffee filter, it's just a small dot on top that cannot be printed.
Printing Instructions:
- For quality reasons, projects is split into 5 parts.
- Scale the model (it's almost 10cm high, 5cm work just fine)
- Hide the seam at the back.
- Filter and Body need support.
Use 2 (or 4 as in the pictures) 8mm x 2mm round magnets to attach the filter to the machine. Or glue it to the roof, alternatively. If you like to make inserts / pockets for the magnets, add modifiers in PrusaSlicer (AFTER scaling) to suit your magnets' dimensions. Not required, but recommended.
Filaments: PLA silver & Wood (for the handle)
Design Source / Real machine: https://zuriga.coffee/Produkte/ZURIGA-E2/ZE10066
UPDATE: Added a miniature key fob which was printed on a SLA printer.
PLEASE respect my choice of NON-COMMERCIAL LICENCE
Model origin
The author marked this model as their own original creation.
