Chromatic DOUBLE BASS pan flute 4 octave Tunable

Edit : I resized the reinforcement to make them fit easier.

The note range goes from C2 to C6

This will be a long......... journey to print, glue, paint, varnish etc.. Mine is almost done... It start to play for real.

For the Print details : Try to print all the tips and both smaless Octave at 0.4mm and the rest a .5mm. The biggest parts, I did print them with a 1mm noozle.

The better the print quality your part will be, the less you'll have to work on sealing those tubes.

The flute it self mesure 136Cm~ of height.

This is somewhat an easy print. I recomand wood pla with at least 2mm wall thickness and for you to use wood glue to glue it all.