Bambulab X1CC

This mod on the G-Code X1CC  to support printing of PETG.

I only print PETG so no issue for me … i printed more than 30 hours with this.

TRY AT YOUR OWN RISK.

if you printer have this issue.

1. some small filament stuck at nozzle (in picture 1)
2. When it doing scan of the first layer, the nozzle pickup the residue of fillament cause slump (in picture 2)

the modification that i did

1. disable the scanning of first layer.
2. double the nozzle wipe… 
3. add nozzle wipe before it print the first layer.
4. reduce the purge from E50 to E30
5. disable L line print.

just replace the machine start g-code with the txt files.

let me knw what is your test outcome.

PS: Borrow the picture from you