M4 slide nut / t-nut for 3030 extrusion profiles (Prusa MK3/MK3s)

This slide nut (or t-nut) fits perfectly into the Prusa MK3/MK3s extrusion profiles (Or any standard 3030 profile).
It allows you to add attachments to your extrusions and is cheaper than an aluminium nut.

Requirements:

• 1x M4 nut

Print instructions

For best mechanical results, use PET-G or ABS.
I recommend honeycomb or gyroid infill at or above 30%.
(Use 100% infill for best stability)