Candelarbol

Candle holder in the shape of a Christmas tree.

Candelarbol (from candelabra and tree) is a minimalist design that grows in a spiral to form a Christmas tree illuminated by 6 candles.

Use this Christmas decoration to set the mood with its lights, as a centerpiece for your Christmas dinners, or as a home decoration.

The candle holes are big enough to easily insert and remove candles with a diameter of 38 mm (typical candle size). LED or traditional candles can be used to illuminate the tree.

The height of the model is 230 mm so it is printable on almost any printer and uses only about 160 grams of plastic. Discover the star shape hidden underneath the candles!

3D PRINTING PARAMETERS

The following configurations are recommended for printing:

• Use of adhesive bed
• Use of supports with an overhang angle of 63° (enough so that there is only a star-shaped support under the sails).
• 10% infill
• Bottom layers: 5
• Top Layers: 3
• Wall line count: 7

Recommended to print in matt filament and green color (to resemble a Christmas tree) but print it and enjoy it as you like!