Arduino Breadboarder, Prototyper, Control and Read-out Unit

A multi-functional prototyper setup for an Arduino Uno containing the most needed electrical components for prototyping and breadboarding for your favorite Project. The design is based on the Prusa Control Unit of the Mk3s.

I got sick and tired of making new prototyper configurations each time on a breadboard, so a made this special prototyper. This leaves the breadboard free for all your customizables of the project.

The prototyper contains:

• A 20x04 LCD screen - for the read-out
• A Potentiomer for setting variable input
• A Push-button on the front
• A Rocker switch KSD11 on the left (10x15mm)
• 2 LED's for visual output
• A speaker for audible output
• An SD-card reader for storing data

The prototyper plate leaves room for an Arduino Uno and a medium breadboard.

All components are rather standard to find based on the geometry, however in case of doubt: please contact me. Some more data on the specific SD-card break-out will follow, however a made a dedicated adapter bracket which can be customized.

The back-cover is optional. I designed it, but the was not really needed. Therefore, the design is not as neat as you want.

Design requires several countersunk and standard hex bolts/screws for the connections.

Step-file is included so that you can edit the design if needed

Print Settings