75cm Robot City Character

More large robot prints are comming up :) …. 

This one is based on a the cover art of the SciFi novel “Isaac Asimov's Robot City”. In Particular the German version of the first book of this series “Die Odyssee”. The book appeared in 1988 (ISBN13: 978-3-404-23079-2).

Since it has not been designed by me (I am not skilled performing such tasks), full credit goes to the artists on Deviant Art and Fiverr.

The 3D model of this robot was designed by “arvindkumar849”. Here is the link to his Fiverr account: https://fiverr.com/share/6wD8kB

To mount the parts there are holes included which fit standard 40mm long, 8mm or 10mm in diameter wooden bolts (very rarely also 30mm x 6mm if not enough room for larger ones).

I printed the files as prepared, removed the supports and glued the parts together with super glue for the surfaces and mounting glue for the wooden bolts.

For Printing a usually chooese quite strong settings since I made the experience that printing such larg figures make thin walls and low infills very fragile. But all 3mf files are included as well. So change the settings to your preferences to make the print faster & cheaper or even tougher :) …

Also included is the uncut STL file … so you can scale the robot to your needs.

Enjoy