Xmas Bauble Card

Why

Some xmas decorations, they print flat, within a card! 

You can twist the inner sections to give the bauble a bit more dimension. Tiny bridges connect the parts, these should deform without breaking up to around 180 degrees when printed in PLA.

Printing and Assembly

There is one gcode file for this, which is essentially the PrusaSlicer 0.2mm Speed profile. I made some changes and added some modifiers; print time reduction, reducing first layer retractions, some aesthetic decisions.

I've included the PrusaSlicer project used to generate the gcode. This I called ‘xmasBaubleCard.3mf', it's in the files section.

If you just want the baubles without the frame or hooks. You can delete anything you dont want using PrusaSlicer and just print the parts you need.

Enjoy!

Adam M.