Z-tops with integrated light bar supports

Light bar for Prusa MK3

Version that fits Bear frame: https://www.prusaprinters.org/prints/3879-z-tops-with-light-bar-for-bear-frame

Print instructions

I used a piece of wood with 2x 12V LED strips glued on, wired in series, and powered with the 24V from the printer PSU.

Wood dimensions: .375 x .625 x 13 inches. That's right, inches. Inches are for woodworking, mm's are for 3D printing. ;-)

Here is a LED strip that will work:
https://www.amazon.com/gp/product/B00HSF65MC/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

Print without supports in any material. There are a few inbuilt supports that you will need to cut away with a knife after printing.