Had to use some hot glue but looks pretty nice.
Houses xmas decoration
!!MORE hoses and textured versions COMING SOON!!
1.12. Last update
Easy to print with NO supports
In the contest 2022 Holiday Decorations
157
560
8
3565
updated
December 1, 2022
Makes
Comments
Hi, very nice model! Thanks a lot.
There is just one issue with textured versions - there are missing holes for middle wall in textured version of house n.3 and n.4.
Is it possible to get some editable version to be able to fix it?
Nice model, little bit struggle with the pegs (take care to print them flat :) ) otherwise wonderful xmas decor will print tons of them for family
I made house 1. It printed nicely. I did have a problem putting it together, but with lots of hot glue, it looks pretty nice.
@PenguinNinja looks great :) where was the issue? I’ll look at it. To tight or loose? It’s tuned on 0.4 nozzle with other diameters can be issue with tolerances.
It’s also looks like you printed sides wrong direction to the hotbed it will be the cause why you have straggles because the pegs were printed on air. I’ll change direction of Stl to avoid this for others. (edited)
View one more comment
@TAdamovska zdravím, vypadají super jen to chce nižší vrstvu, pak se nepropíšou otvory na zacvaknutí boků. Doufám, že budou dělat radost. :)
@Sysel děkuji, zkusím opravit. Tiskla jsem je velmi tenké.
@Kammi_254759 Není za co, moc mě těší že se líbí. :)