Ringlight mount for the Revopoint Handheld Stabilizer (POP and MINI Series)

For scanning Human heads I needed a even source of light. I have not had satisfactory results with fixed lighting as I need to be able to move around my model and then inevitably block some of the lights. On an intuition I used my cell phone as a light source and the result was noticeably better but not perfect. With a ring light the results should be even better - I just need to get it mounted on the scanner. 

The STL files are numbered and always the most recent.

Additional it needs a Ball bearing to connect the two pieces and two tripod screws to connect everything. The ball bearing needs an inner diameter of 8 mm and an outer diameter of 22 mm and a height of 7 mm to fit.

It's a work in progress because I want it to have some additions to work perfect, like a lever to move with the Scanner Head. 

Note: With warm light you get better results than with blue/cold light.