This is a simple device for keeping your x-axis cable off the table on a Lowrider CNC. The weight on the end clamps onto the cable and the bearing guides the cable. Pretty simple idea but works great.
Weighted Box - Needs M3 x 25 screw and M3 nuts (x4)
Bearing Guide - 608 Bearing, M6 x 30 Bolt, M6 Nut
The bearing guide attaches using the bolt that holds on the inline wheel on the Y-Plate.
Printed without supports. Doesn't need a lot of strength. I did 2 parameters and 20% infill.
Spacer is for M6 bolt going through the bearing.
Spacer M5 is if you want to use an M5 bolt instead of M6.
The author hasn't provided the model origin yet.
