Guinea Pig Bedroom / Platform

Designed in Fusion 360 and printed on the Borg (CR-10s4 on Steroids)
This was for my neighbour that had just got a Guinea Pig for their little boy.

Print instructions

Platform
Dimensions 280mm x 280mm x 160mm
Printed in PLA on the Borg
Print time 13h 52m 20s
0.8mm nozzle
4 x top and bottom layers
3 x perimeters
10% infill
0.48mm layer height

Ladder
Dimensions 300mm x 140mm
Print time 3h 34m 08s
0.8mm nozzle
4 x top and bottom layers
3 x perimeters
20% infill
0.2mm layer height