SUNLU pull-out box for the Lack table

The Sunlu S1 dry box next to the Lack table gets in the way. I designed a pull-out system under the table, using drawer slides 550 mm long, full extension. I fitted the screws with a trisert 237 self-tapping thread insert for plastics. In models box_sunlu_A and box_sunlu_B shortened to 6 mm, others in the original length of 8.4 mm. An M30 threaded bushing is used to feed the filament through the table top, I drilled a hole for the filament outlet in the back of the Sunlu S1. The supports are attached to the table legs with screws. Models podpera_sunlu_1 and podpera_sunlu_2 are used to fix drawer slides - tables without wheels. The podpera_sunlu_1_round and podpera_sunlu_2_round models are used to fasten drawer slides - tables with wheels, see Wheel holder for Ikea Lack table

PETG material
Nozzle 0.4 mm
0.2 mm layer
Supports as needed

Note:
photos of parts:
support_sunlu_1
support_sunlu_2
support_sunlu_1_round
support_sunlu_2_round

they do not fully correspond to the attached 3D models, after assembly I adjusted and reinforced them, to increase stability.