Surface 3 Pro power supply case

I have a refurbed Microsoft Surface 3 Pro. , the power supply was not the OEM with the extra USB in front.

I had one of the right one, but sadly the capacitor was bad. This is not something there are impossible to repair but after that, the plastic case looks like a wreck.

I have made this new case for the supply. They are two models: the first no 1 have a slit inside the case to the screw, No 2 has more beefy surroundings around the screws.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

Doesn't Matter

Supports:

Doesn't Matter

Resolution:

200

Infill:

20

Filament: Fiberlogy easy PET-G PET-G Your choice :-)

Notes:

The blue case is printet in Smartfill PLA it's nice but I have some concern about PLA for a 230V PSU. Next was printet in PET-G

Use M3 screw, and a 3M Tap for prepaire. The lids hole can be drilled up to 3mm, if too tight.

Category: Electronics