DMM Holder, Digital Multi Meter Wall Mount

This 2 piece bracket lets you mount a DMM (digital multimeter) on a wall. The bracket currently holds a DMM that measures  2.7" (69mm) wide and 5.68" (144mm) high. You way need to remix this to fit your specific DMM.

Printing Tips

No supports required for printing. I used .3mm spacing and 10% infill with a .4mm nozzle. Arrange the parts on the print bed as shown in the pictures. 

Hardware Required

-3 Screws, I used 1.25" Panhead Screws (I was only able to get 2 in because of clearance issues with the mount. This was because I glued the two pieces together prior to mounting to the wall. Two screws is plenty strong though.)

-Glue, super glue is used to connect the plastic top and the plastic base together (See Picture)