IKEA Koppla Mount brackets for Table Back

Print laying on the side without support structures. That way the part is the strongest

I printed it with 5 Walls and 6 top and bottom layers; 20% infill.

To attach it I used 4.5x16 mm Wood screws. You can also use longer ones depending on your installation case.

Mounting order:

• First mount the closed bracket with 3 Screws
• Then insert the Koppla 
• Push the second bracket (cable side) against the Koppla
• Mount the second bracket with 3 screw
• Now you can remove the Koppla by pulling up the cable side if you want to do so