Bird feeder

It consists of the 4 parts gluded together.

Print recomends:

Base:

Material PLA

Layer height 0,3mm

Supports NO

Infill: 30% (gyroid)

Tube:

Material PLA

Print as spiral vase

Roof:

Material PLA

Layer height 0,3mm

Supports Recomended (in the locks)

Infill: 30% (gyroid)

Plug:

Material PLA

Layer height 0,3mm

Supports YES (under the pins only)

Infill: 15% (gyroid)

THANK YOU FOR DOWNLOAD