Plastic Bag Dryer

I designed this object with the goal of being able to better dry out some reusable lunch bags we purchased. I leveraged off-the-shelf bamboo skewers for this design as they're cheap, strong, and readily available. Most grocery stores should carry these.

Printing Tips

1. Sliced files are for site metrics. Slice your own to your own preference.
2. All files print without supports.

Assembly Tips

1. The bamboo skewers I got from the store were about 4.8mm (.19") in thickness and 300mm (11.81") in length. Most of what I found there was the same basic dimensions.
2. Print the base and the ends in any color or colors you wish.
3. Clip the pointy ends off the skewers as they're sharp and impaling yourself is painful.
4. The four skewers in the middle were left at their full length, sans pointed end.
5. The four skewers that cantilever further out were cut down by about 100mm, but you do you there.
6. The skewers should insert easily into the base.
7. The ends should fit snugly at the tops.