Centering circular jig for Sculpfun S6 Pro (v2)

This part is designed for the Sculpfun S6 Pro laser. First, it joins the outer diameter of the laser safety cover. Then, it centers the wooden circle part (the one you want to engrave) to the laser.

I spent way less time with this jig to position my wooden circles.

For now, I designed only for circles of Ø100 mm. I'll update this model with more sizes.

PRINT

• PLA
• Standard layer height 0.2.
• No supports needed.

HOW TO USE

1. When the laser is in its "home" or "start" position, put the jig towards the safety cover (do not push and move the laser engraver).
2. Press the jig to ensure no movement when adding the wooden circle.
3. Add the wooden circle and check that it has reached its position by looking through the hole in the jig.
4. Hold the wooden circle.
5. Pull the jig without moving the laser engraver or the wooden circle.