24 Inch Roll Paper Spool Holder

My makerspace salvaged an HP Designjet 500 plotter that came with no accessories.

Ordering a 24" roll of paper to test it with, we needed some way of feeding the roll into the printer.

You'll need two of these per roll, and a suitable bar to go through the middle.

The inner diameter is 10mm, and a bit of a tight push.

If you need a different diameter, leave a comment and I'll see how large I can go.

Print instructions

Printed in PLA with the default 0.3mm DRAFT profile with the following tweaks;

• 4 perimeters
• Cubic Infill @ 20%